NanoSkin Glide - 16 oz RTU
$6.99
Available Sizes
16 oz RTU
$6.99
($0.44 / oz)
128 oz
$49.99
($0.39 / oz)
Product Information
- Awesome lube and quick detailer
- Works great in combination with the NanoSkin AutoScrub Fine Foam Pad
- Ready-to-use formula
- Product Codes: NA-GLI16, NA-GLI128
- Read full description
Packages That Include This Item
Product Description
NanoSkin Glide is a key component in the NanoSkin AutoScrub process and a great quick detailer by itself. Glide not only provides adequate lubrication for the AutoScrub Pads, but it also helps to removes minor contaminants safely, like dust, dirt, fingerprints, bugs, and more! Mist a generous amount of Glide onto the surface and use the AutoScrub Pads to buff off the contaminants with ease. This process will deep clean your finish similar to what a clay bar can do but so much faster. When you are done wipe the surface with a clean Microfiber towel to remove excess product and you'll have a clean surface with a great shine. Glide dries clear so you can use it on your glass, chrome, plastic, and trim for a quick cleaning and added shine. Don't forget you can use the NanoSkin Glide as a quick detailer as well so mist it on your paint and wipe with a clean microfiber towel for quick cleanings. If you want a great deal on a high-quality product the Glide is a great choice!Note:: As of 3/34/21, Glide 16oz is no longer concentrated and NanoSkin changed the formula to a ready-to-use (RTU) version.
Professional Detailer Reviews
I'm very happy with the NanoSkin Glide and have found my new go-to product for decontamination. I would highly recommend it for any detailer to at least try if they are currently using another product, as I'm sure they'll keep it in the arsenal. As an added bonus, it smells very good.
Videos
NanoSkin Glide Instant Detail Spray Lubricant
Nanoskin Autoscrub System
Product Downloads
From The Label
Product Description
As a component of AUTOSCRUB, NANOSKIN GLIDE lubricates the paint so well while gliding the AUTOSCRUB back and forth. GLIDE removes minor contaminants, dust, fingerprints, bugs, and more, restoring the brilliance of a showroom finish. It can also be used on glass, chrome, and plastic. The spray dries crystal clear on any surface and enhances reflections on shiny materials, like chrome wheels and trim. It's so easy and you can detail a full size car in less than 10 minutes.
Directions
DILUTIONS:
AUTOSCRUB 7 : 1
Clay Lubricant 10 : 1
Instant Detail Spray 10 : 1
DIRECTIONS:
AUTOSCRUB-
Instant Detail Spray:
AUTOSCRUB 7 : 1
Clay Lubricant 10 : 1
Instant Detail Spray 10 : 1
DIRECTIONS:
AUTOSCRUB-
- Thoroughly wash vehicle free of dust, sand, and dirt.
- Mist sufficient GLIDE onto the surface evenly.
- Polish the surface with dual action orbital polisher using light pressure. (Low Speed).
- Wipe off residue and apply wax or glaze.
Instant Detail Spray:
- Shake well. Use only on clean, cool paint and out of direct sunlight.
- Mist GLIDE onto one section at a time.
- Quickly spread product with clean dry microfiber towel.
- Turn to a dry portion of the towel, then wipe dry.
Customer Reviews
There are multiple uses for Nanoskin Glide but I use it as a Clay Lubricant. It works well and does the job. It is also economical as I dilute it 10:1 as recommended. It also has a pleasant scent.
This works great. I used with a clay sponge and very happy with results.
This is one of a few different clay lubes that I buy when on sale. It does a better job than typical QDs or ONR and is economical. I have used clay lubes in the past that had a buttery consistency, and some that were too diluted or watery, but this one has a perfect consistency and lubricity, without being overly slick where the clay can't bite. Recommended.
