Optimum Hyper Spray Compound - 18 oz
$27.99
Available Sizes
18 oz
$27.99
Product Information
- Innovative compound that will remove moderate to deep imperfections in an easy to apply solution
- Work inside or outside with long work times and minimal dusting
- Typically used with cyan, orange, yellow, cyan or purple foamed wool pads
- Product Code: OPT-20604
- Read full description
Product Description
Optimum Hyper Spray Compound once again proves Optimum is an industry leader in innovation. Never before have polishes like this come in a spray on form that save you both time and effort. It can quickly remove remove swirls, oxidation and ultra fine scratches for good! It has the cutting power of a medium to heavy cutting polish but it finishes down more similar to a light cutting polish. Generally it should be followed up with the Optimum Spray Polish for best results. After one application you will be amazed at the depth and gloss it can bring back to your clear coat. It can help restore very old vehicles and make even the newest vehicles look better! It can be used on all types of clear coats with outstanding results. It can remove light wet sanding marks, buffer haze and more noticeable surface imperfections. This completely new formula took years of research and testing to perfect with help from one of the worlds largest car manufacturers. The goal during the design process was to create the best results possible in the least amount of time. It utilizes ultra fine micro-abrasives that will not break down and offer excellent polishing power that is safe and easy to use. This one of a kind formula will impress you from the very first application and beyond. To use it simply spray the polish on your pad or directly on your vehicle and begin buffing. When you spray it on your pad it more evenly coats the pad so the pad is instantly primed and ready to be used. You can even do both by misting it on the pad and the paint for best results. Traditional polishes often leave some parts of the pad dry and other parts of the pad caked up with too much polish. This can cause hazing and other surface imperfections, producing less than ideal results. With a spray on polish you wind up using less product and saving money because it's being spread more evenly. Best of all during the application you'll notice there is no dusting and it works great in the sun or shade. This means less time is spent on removing the excess polish as well. The convenient spray polish is perfect for professionals and enthusiasts alike so everyone will enjoy improved results in less time. Upon completion the paint will look more optically clear and glossy. Try the Optimum Hyper Spray Compound today and you'll see why a world's leading car manufacturer, professional detailers and car enthusiasts alike are loving this product!Videos
How to Use the Hyper Paint Correction System
From The Label
Product Description
The Hyper Paint Correction System is the fastest and easiest way to remove, not fill scratches and swirl marks. This ground-breaking spray compound is a fast cutting, ZERO dusting, and user friendly. A unique blend of proprietary polymers and abrasives allow for rapid removal of sanding marks and deep blemishes. No dust or chalky residue.
Directions
DIRECTIONS:Always shake well before using. For fast cutting of 1200 and finer sanding marks, use a rotary polisher with Optimum Wool Pad at 600-1000 RPM or a Zentool 21E with the Hyper Wool Foam Pad at speed 3. One to two sprays per 2 sq. ft. area will suffice. Additional product is not needed as the compound will keep cutting and has a long working time. For best results, dampen pad with Optimum No Rinse Wash & Shine. Spray Hyper Compound directly on the panel or on the pad. Use light pressure for fast cutting. Dampen a microfiber towel with Optimum No Rinse Wash & Shine and wipe off the residue. Use Hyper Compound with a foam pad for lighter cutting. Always follow up with Optimum Hyper Polish with a foam pad as the final step for a perfect finish. VOC compliant and body shop safe.
Customer Reviews
The product is very good. However, I do not like the sprayer part. The sprayer did not spray from the beginning; it got clogged and just wouldn't spray the product out. The sprayer was useless. I ended up switching to a cap/top that was more functional to apply the product onto the pad.
I finally had the chance to test Hyper Compound out on a scrap door I found on the side of the road. I had issues with the first sprayer head. I contacted Optimum, and they sent me one, which matched the sprayer on Hyper Polish, Intensive Polish, and GPS.
I scuffed the door with 400, and 1000 grit scratches. I also prepped the pad with a few sprays of ONR 256:1, turned on speed 3, and wiped with a microfiber as it ran, to clean and prep the pad. One spray of Hyper Compound to the pad, and I was off and running.
Started with my old favorite cutting pad from 2013 - the green Hex Logic. Did well against the 1000, but not the 400 grit. Swapped to a Buff and Shine Uro-Fiber, and the teeth came out. Obliterated the 1000, and did some damage to the 400. It was have taken quite some time to get the 400 grit out, as well as sure fire destruction to the paint depth! P.S. the tool I used was the original Porter Cable 7424 - pre "XP", on speed 3.
While Hyper Compound cut beautifully, be advised that it is extremely aggressive. Use with the Uro-Fiber produced considerable marring that was easily cleaned up with Hyper Polish on a blue Hex Logic pad. I personally don't care how a compound finishes, as long as it removes the defects, and can be fixed with a finishing polish. Best news of all is that there was almost no dust. Not bad for a compound whose grit you can feel between your fingers.
I guess I've been fortunate with the sprayer, because none of them have clogged, even with time off from using up my other compounds and polishes. Be advised that the slightest movement of the spray adjuster drastically alters the spray pattern. I dialed mine in and left it. So far so good. My first sprayer never worked. It clogged, and locked up. The new one is absolutely perfect.
I never though I would ever consider spray on polishes like this, but I'm glad I did. The other benefit to using Optimum abrasive liquids is that they play perfectly with their Car Wax and Opti-Seal. After using Opti-Seal after Hyper Twins, I saw beading that I never saw with it when used after Menzerna, Meguiar's, 3D, or Jescar. And to be honest I was very underwhelmed with Opti-Seal until using it after the Hyper Twins.
Definitely buying again.
I scuffed the door with 400, and 1000 grit scratches. I also prepped the pad with a few sprays of ONR 256:1, turned on speed 3, and wiped with a microfiber as it ran, to clean and prep the pad. One spray of Hyper Compound to the pad, and I was off and running.
Started with my old favorite cutting pad from 2013 - the green Hex Logic. Did well against the 1000, but not the 400 grit. Swapped to a Buff and Shine Uro-Fiber, and the teeth came out. Obliterated the 1000, and did some damage to the 400. It was have taken quite some time to get the 400 grit out, as well as sure fire destruction to the paint depth! P.S. the tool I used was the original Porter Cable 7424 - pre "XP", on speed 3.
While Hyper Compound cut beautifully, be advised that it is extremely aggressive. Use with the Uro-Fiber produced considerable marring that was easily cleaned up with Hyper Polish on a blue Hex Logic pad. I personally don't care how a compound finishes, as long as it removes the defects, and can be fixed with a finishing polish. Best news of all is that there was almost no dust. Not bad for a compound whose grit you can feel between your fingers.
I guess I've been fortunate with the sprayer, because none of them have clogged, even with time off from using up my other compounds and polishes. Be advised that the slightest movement of the spray adjuster drastically alters the spray pattern. I dialed mine in and left it. So far so good. My first sprayer never worked. It clogged, and locked up. The new one is absolutely perfect.
I never though I would ever consider spray on polishes like this, but I'm glad I did. The other benefit to using Optimum abrasive liquids is that they play perfectly with their Car Wax and Opti-Seal. After using Opti-Seal after Hyper Twins, I saw beading that I never saw with it when used after Menzerna, Meguiar's, 3D, or Jescar. And to be honest I was very underwhelmed with Opti-Seal until using it after the Hyper Twins.
Definitely buying again.
The compound does work, however you may experience marring. If you are a DIY'er don't freak out, make sure you buy Hyper Polish as a companion which will fix the marring. I have a 2015 Nissan Rogue in SuperBlack. Due to rural area and bad water I have to use rinseless wash which results in a lot of swirling over time. Decided to switch to Gloss Coat which has worked really well on the front fascia and back deck. Now working on sides, where the grime results in many swirls - dealer wash gorillas did not help either. Tried various pads (Rupes Yellow and LC orange) but best results came from using Chemical Guys HexLogic pads. H Compound with CG Orange produced alot of marring which fixed with Hyper Polish and CG White pad. Then switched to Compound with CG Green pad which was much less marring, but still needed CG White with HP to finish up. HP with CG Orange also worked on lighter swirls, but again finishing with HP and CG Black pad. The spray feature of these polishes sounds good, but stinks in practice - you can NEVER keep a fine spray coming from ANY nozzel. The product starts drying in the nozzle and on the second spray it's squirty a stream which defeats the spray feature. I gave up and just put "spots" on the pad by turning the botton upside down on the pad - JUST SMALL SPOTs or you'll start spraying polish all over your paint when you start your polisher. Used Adams Polishes 12mm Mini Swirl Killer (sale for $150) which I love - much more quiet and smoother than CG Torq FX, or Porter Cable (both 8mm). Highly suggest that DI carries both the 12mm and 15mm versions of this polisher - for DIY'ers this machine is great and MUCH less than Rupes machines. Makes polishing enjoyable, does all of the work (I never broke a sweat), is quiet, and rugged build. HIghly recommend this whole combination - Adams polishers, CG pads, and Hyper Compound and Polish - you don't need anything else.
Customers Who Bought This Item Also Bought
Related Items
Related Categories
