Shake well before use. Ensure surface is clean, dry and free of contaminants. Bonded contaminants should be removed using a clay bar or equivalent method. Do not use on surfaces that are excessively hot to the touch. TLC+ may be used in direct sunlight if necessary but product performance cannot be used guaranteed.

When using a dual-action polisher, apply three dime size amounts to a foam, microfiber or wool pad. For increased aggression 1-2 additional dots can be added. TLC+ utilizes diminishing abrasives so product spreading technique is key. For optimal results, do not spread this product over the work areas using machine speed 1 or 2. Spread by using hand motion over the work area. This avoids the diminishing process prematurely and provides the highest defect removal capability. The typical work area is 24" x 24", however this can be adjusted based on your needs or task at hand. Machine speed will vary based on pad selection however #6 or #5 is generally preferred for the best defect removal aspect of paint correction using TLC+. Work product into paint using slow hand motion in your preferred pattern until desired results are achieved.

When using with a high-speed rotary polisher, equip machine with a foam or wool pad. Apply 4 dime size amounts to pad or your preferred compound application technique. Set RPM to 1400 or above; using your chosen hand motion method until desired results are achieved. Remove residue using a clean, dry microfiber towel.

TLC+ provides no protection so a product of your choice will need to applied thereafter. For Gel Coat applications, a Rotary machine paired with a wool pad is preferred.