Many German auto manufacturers have been using the new ceramic clear coats for several years and US automakers are now starting to use them as well. The new ceramic clear coats are are more scratch resistant but they are not scratch proof. This is good and bad news, because these clear coats should prevent more fine scratches and swirls, but they are now harder to remove. Blackfire has partnered up with Menzerna to develop one of the world's leading polishing formulas for ceramic clear coats and traditional clear coats. The Blackfire SRC (Scratch Resistant Clear) Finishing Polish is designed to help you safely remove light swirls, oxidation, old wax, old sealant and light scratches in the clear coat. These types of imperfections are on virtually every vehicle and they can cause your paint to look dull and faded. The polishing particles help buff out fine imperfections and permanently remove them. The secret to their success is using and ultra small and densely clustered particles By removing these imperfections you can restore your paint to like new condition and sometimes even better. This is possible because when the imperfections are gone the light will go right through the clear coat and reflect a sharp and vibrant gloss from your paint. The SRC Finishing Polish is highly effective so you are sure to get significantly more shine from just one application. Like most polishes this product will get you better results if applied with a quality buffer and polishing pad, but it can be applied by hand. When being applied with a quality buffer it can remove 3,000 grit swirls and scratches. Use the Blackfire SRC Finishing Polish after using a more aggressive polish like the Blackfire Compound and before applying a glaze, sealant or wax.