$4.99 Shipping over $49 w/coupon DI499 | 2,950+ Products | 95 Brands | 12,000+ Reviews | 1,850+ Detailing Articles
Close Menu
Clean ⋅ Shine ⋅ Protect
Cookies are disabled in your web browser. To shop with Detailed Image, please turn cookies on and then refresh the page.

Meguiar's Pro Speed Compound M100 - 32 oz

Meguiar's Pro Speed Compound M100 - 32 oz
Add to Cart
$29.99

 Quantity
Discounts 

Quantity Price Savings  
2 + $27.99 7%
Add 2 to Cart

Available Sizes

Meguiar's Pro Speed Compound M100
32 oz
$29.99
($0.94 / oz)
Meguiar's Pro Speed Compound M100
128 oz
$74.99
($0.59 / oz)

Product Information

  • A heavy polishing compound that will finish down extremely well
  • Remove noticeable imperfections safely and easily
  • Pair this polish with a Meguiar's Pad for optimal results
  • Remove swirls, oxidation and fine scratches!
  • Product Codes: M10032, M10001
  • Read full description

Customer Reviews

100% of customers said that they would buy this item again
Based upon 9 ratings

Product Description

Remove severe paint imperfections with ease with Meguiar's Pro Speed Compound M100! You will be amazed at how well this heavy polishing compound removes the most severe paint imperfections, while finishing down extremely well! With one application you notice the minimal hazing left behind immediately after use! It is highly recommended that you use a dual action or rotary buffer to apply M100, however it can also be applied by hand. Pick up a Meguiar's DA Microfiber Cutting Disc Buffing Pad or a Lake Country Purple Foamed Wool Pad and apply at a lower speed to start off. Bump up the speed as needed and you will be able to remove deep swirls and finer scratches quickly and easily! M100 can be used on all paint finishes, including scratch-resistant and conventional clear coats. It is similar to the Meguiar's Foam Cut Compound M101 but far more affordable! If you are looking for a heavy polishing compound that will finish down extremely well then the Meguiar's Pro Speed Compound M100 is for you!

Pad Recommendations:

From The Label

Product Description

  • Fast cutting compound with advanced technology
  • Quick removal of 1200 grit and finer sanding marks for easier polishing
  • Removes deep scratches, acid rain or severe swirls/holograms
  • Works great on fresh & cured paints

PRO SPEED COMPOUND
Fast cutting body shop safe compound with advanced technology designed for Professionals.

Directions

DIRECTIONS: SHAKE WELL. For best results, apply to a clean, cool properly cured paint surface.
  1. Set rotary buffer to approximately 1200 - 1800 RPM's and work one section at a time using your favorite Meguiar's Wool Cutting Pad.
  2. Apply Pro Speed Compound (M100) directly to the paint surface and begin working in a 2' x 2' area with overlapping passes. Buff area using light to medium pressure. Reduce pressure when compound begins to dry. Continue working until defects or sanding marks are removed.
  3. Wipe off remaining residue with a Meguiar's Ultimate Wipe (M9910) prior to polishing.
  4. For final polishing, please choose the appropriate Meguiar's Foam Pad and your favorite Meguiar's polish.
PROFESSIONAL TIP: For best results be sure to remove any compound residue off all door jamb areas before moving on to polishing the surface. Additionally, for optimum results clean your pads frequently using either the Meguiar's Pad Washer (WPW) or Meguiar's Pad Conditioner Brush (WPCB).

Customer Reviews

Reviewed by on
Would they buy this item again? Yes
If you have hard paint then I would recommend this product. You can feel how gritty it is just by feeling it with your finger. Used this one black mustang paint. It removed 90% of swirls with a da and microfiber. It is meant for use with a rotary but da will work fine. Keep in mind two things. You must finish this out with a fine polish or finishing polish. Also, it dusts like crazy. I recommend not overloading the pad. I had to fight dusting throughout the whole process. Apart from that, great product and works as advertised. Take your time and always check your work in the sunlight. It speaks the truth about your work.
Reviewed by on
Would they buy this item again? Yes
Have used with both a rotary and a DA. Took 2000 grit sanding out like nothing. Highly impressed
Reviewed by on
Would they buy this item again? Yes
I've had this product perform miracles.

I actually prefer it with a 60ppi, "heavy polishing" pad, like the Pink Lake Country. I've used M100 and that pad to remove 1500 grit from single stage paint, and hard ceramic clear coats using a first generation Porter Cable 7424. Years ago, that just wasn't possible, and I had to use a rotary.

M100 also works great on Rupes blue microfiber discs for extreme correction, very similar in result to Rupes Zephyr (Zephir is thicker, and more "film-y", giving it a longer work time). Actually, M205 works great with Rupes tools and pads as well.

M100 is leaps and bounds easier to use than M105. While M105 is great, I've had it dust away before any cutting of any kind was done. M100 is far more resistant to that, as it stays wetter on the paint.

Read all customer reviews of Meguiar's Pro Speed Compound M100

Write your own review

Related Categories
My Offers
25 Off Spring Sale
Quantity Discounts - Buy More, Save More!
Big Discounts While Supplies Last - Clearance Items - Shop Now
Free Stuff
Close overlay