3D One
$42.99
Available Sizes
8 oz
$12.99
($1.62 / oz)
16 oz
$23.99
($1.50 / oz)
32 oz
$42.99
($1.34 / oz)
128 oz
$139.99
($1.09 / oz)
Product Information
- Click for complete product description
- Product Codes: 400OZ8, 400OZ16, 400OZ32, 400G01
- Read full description
Product Description
The 3D One is a hybrid compound and polish, which allows you to remove heavy imperfections while finishing the paint to a brilliant shine! When using a compound, generally speaking, you will be left with a little bit of haze on the surface that requires a second polishing step to remove. 3D specially formulated One with a water-based formula packed with Nano Ceramic Alumina Abrasives to minimize hazing. These abrasives provide One with a great deal of corrective power (p1500 sanding scratches), yet it finishes the paint down extremely well. For some paints, 3D One can be a literal one step paint corrective formula but at times a follow up fine polish and pad may be needed. To adjust your results to your goals you can use 3D One with a cutting or finishing pad depending on the level of correction desired. If you are looking to add some protection or to finish down the paint further follow up with the 3D Speed which is a fine polish and sealant. This combination can produce amazing results creating a mirror-like shine and strong protection or feel free to use the 3D One by itself and you will be impressed with the results!3D Directions:
To remove scratches; shake well and apply 4 to 5 dime size drops on your choice of wool or heavy corrective foam pad and buff a 2' X 2' area at a time, with slow back and forth overlapping motions. Once the scratches are removed, apply 4 to 5 dime size drops of One on a 3D finishing pad. Polish with the same overlapping motions, keeping the pad flat to the surface. When the holograms and swirl marks are removed, wipe off residue with a clean microfiber towel.
From The Label
Product Description
Cutting Compound and Finishing Polish
Delivers True Paint Correction
3D ONE hybrid cutting compound and finishing polish accelerates polishing performance. 3D ONE has specially engineered Nano Ceramic Alumina Abrasives that easily corrects paint scratches using a DA or high-speed rotary polisher. 3D ONE is a unique product; apply on a cutting pad to remove heavy scratches and then apply on a finishing pad to deliver an exceptional high gloss finish. It's easy to use, easy to clean up and leaves the perfect finish every time. Works best when applied in shaded areas, but is also sun friendly.
Delivers True Paint Correction
3D ONE hybrid cutting compound and finishing polish accelerates polishing performance. 3D ONE has specially engineered Nano Ceramic Alumina Abrasives that easily corrects paint scratches using a DA or high-speed rotary polisher. 3D ONE is a unique product; apply on a cutting pad to remove heavy scratches and then apply on a finishing pad to deliver an exceptional high gloss finish. It's easy to use, easy to clean up and leaves the perfect finish every time. Works best when applied in shaded areas, but is also sun friendly.
Directions
To remove scratches shake well and apply 4 to 5 dime size drops on your choice of 3D wool or Spider-Cut foam pad and buff a 2'x 2' area at a time, with slow back and forth overlapping motions. Once the scratches are removed, apply 4 to 5 dime size drops of 3D One on a 3D Spider-Cut finishing pad. Polish with the same overlapping motions, keeping the pad flat to the surface. When the holograms and swirl marks are removed, wipe off residue with a clean microfiber towel to reveal TRUE 3D PAINT PERFECTION.
Customer Reviews
Great all around polish/compound.You want cut use microfiber/wool.You want to bring back shine and small defects use medium/orange pads.You can even jewel the paint with red/black pads.The con would be for those that think this will remove 1000 grit and lower scratches . If your a Mobile Detailer this is a good product to use .
Love this product from 3D. Use it almost every day in my professional full time detailing business. Can work on heavier damaged paint if paired with a more aggressive pad or machine. Long working time. Follow up with a polishing pad and more ONE if the money and time allow..but I have done hundreds of cars with just this and an orange DRC pad and as long as your smooth there will be no issues. This is not a heavy cut product unless you use it with an aggressive pad or a rotary. The idea is that you can cut or finish with just this product by changing pads.
Good stuff. Teamed it with a uro fiber pad and it removed the light marring left after clay'n...
