NanoSkin AutoScrub Handy Towel - 7" x 7"
$24.99
Ships tomorrow when ordered in the next 29 hrs 30 mins
Available Sizes
7" x 7"
$24.99
Product Information
- Remove embedded contamination quickly and easily!
- Receive 40-50 uses from one towel
- Handy 7" x 7" size
- We strongly recommend using the NanoSkin Glide as a lubricant, other lubricants may not allow the pad to get optimal results and durability
- Product Code: AS-015
- Read full description
Packages That Include This Item
Product Description
The NanoSkin AutoScrub Handy Towel is a high quality microfiber towel combined with a technologically advanced polymerized rubber pad. This towel allows for the safe and easy removal of contaminants, paint over spray, and brake dust from the surface of your paint, glass, vinyl, and plastics. Just simply spray the NanoSkin Glide onto the contaminated area and glide the Handy Towel across the paint. With light pressure slide the towel back and forth so it can separate and remove contaminants from the exterior of your vehicle! The rubber pad works just like a traditional clay bar when it removes the embedded contamination from your paint, while the lubrication of the Glide protects from marring the surface. Once finished your car will feel smooth and clean of any surface contamination. You can then move on to polishing, waxing, coating, etc of your paint knowing you are working with a clean surface below. The ease of use with this towel is incredible! No more molding and shaping clay bars, just unfold the towel and use! If you drop it on the floor like a clay bar you will not have to throw it out, simply wash it off and reuse. Best of all this towel comes in a handy 7" x 7" size and it will last around 40-50 uses, not 10-15 times like a traditional clay bar. Pick up the NanoSkin AutoScrub Handy Towel today and remove contamination from your paint safely and easily!The NanoSkin AutoScrub Handy Towel sits right between a fine grade and medium grade clay bar. Making it the perfect tool for any clean or dirty cars alike!
Note: With all clay alternatives, breaking them in might be necessary, especially on sensitive paint types. To break in your pad, towel or mitt, spray your clay lube onto the clay media and on a portion of glass. Rub your pad, towel or mitt in a circular motion against the glass for 30-60 seconds. Wipe your clay media clean and you are set to start using it on your painted surfaces!
Videos
Nanoskin Autoscrub System
From The Label
Product Description
- Lasts 2-3 time longer than clay
- For a flawless "show room perfect" shine
- Glides on & off easily for a slick finish
- If inadvertently dropped on shop floor, simply rinse clean.
Directions
TIPS:
Use ONLY on clean, cool paint out of direct sunlight. DO NOT work on the surface over 144 degrees F. Test in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.
To break in the pad, moisten the AUTOSCRUB with desired lubricant.
Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. During this time you may see a white soapy foam. This is the protective sealant coming off. Don't use until the polymerized rubber is soft and slightly tacky.
Cold temperatures may stiffen pad. Warm surface before using.
Total import Solutions is not responsible for the misuse of this product or if the product is used in any other way than directed.
- For surface prep = Use with NANOSKIN GLIDE Instant Spray Lubricant.
- For ONE-Step Clay, wax, and seal = Use with NANOSKIN NANO SHOCK Hydrophobic Spray Lubricant Sealant. *For glass prep, and hydrophilic anti-static sealant = Use with RAIN PREP Glass Cleaner/Activator. Then follow with RAIN Glass Sealant and microfiber towel.
Use ONLY on clean, cool paint out of direct sunlight. DO NOT work on the surface over 144 degrees F. Test in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.
- Thoroughly was vehicle to free surface of dust, sand, and dirt.
- Dilute GLIDE to desired strength (16 oz. makes 1 gallon RTU.) or NANO SHOCK
- Mist sufficient GLIDE or NANO SHOCK onto the surface evenly.
- Polish the surface with light pressure.
- Wipe off residue and apply wax or glaze.
- Sufficient lubrication is crucial to the AUTOSCRUB application.
- Plain water is NOT an adequate lubricant.
- AUTOSCRUB is not solvent resistant.
- Remove tar & grease before application
To break in the pad, moisten the AUTOSCRUB with desired lubricant.
Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. During this time you may see a white soapy foam. This is the protective sealant coming off. Don't use until the polymerized rubber is soft and slightly tacky.
Cold temperatures may stiffen pad. Warm surface before using.
Total import Solutions is not responsible for the misuse of this product or if the product is used in any other way than directed.
Customer Reviews
Works great! Speeds up decon step. No making left behind.
This towel quickens my decon step isn't as aggressive as clay mitts. Makes paint smooth for last step protection.
I thought this product worked really well my first time using it. Plan to keep using it and buying again.
Customers Who Bought This Item Also Bought
Related Categories