22ple HPC High Performance Coating
! We're sorry, this item is currently out of stock
Estimated arrival: unknown.
Out of Stock
$169.99
This product qualifies for Free Shipping with coupon DIFREE

Available Sizes

30 ml
$109.99
($3.67 / ml)

50 ml
$169.99
($3.40 / ml)
Product Information
- Enhance gloss and protect your paint for 3 ~ 4 years!
- Easy to use coating with amazing beading properties
- Features powdered silica and high grade fluorine
- Works great with the 22ple Glass Coat Applicator
- Product Codes: HPC, HPC
- Read full description
Product Description
22ple has been listening to feedback from professional detailers and detailing enthusiasts alike to help them develop HPC. HPC stand for High Performance Coating because it truly takes coatings to the next level. This coating utilizes silica powder which is significantly more expensive than liquid silica and delivers superior performance. On top of utilizing silica powder, HPC features a unique formulation of high grade fluorine. What does all this mean? The powdered silica improves the already outstanding 22ple gloss and the high grade fluorine gives amazing water beading results. This takes coatings to a new level and will really make your paint stand out against the rest. Gloss, gloss, gloss and more gloss! Your car will look like it is entirely coated in glass! Prior to coating be sure to thoroughly clean an polish the paint because HPC will last 3 ~ 4 years. Approximately 20-25 ml is recommended for a mid/large size car. If you are looking to take your paint to the next level with gloss and protection, the 22ple HPC High Performance Coating is your coating!Please Note: 22ple Glass Coat Applicator sold separately.
Sizing Recommendations:
- 30ml - With some experience you can get two applications
- 50ml - Best value and if you are looking to perform multiple applications or want to apply on multiple vehicles
Application Instructions:
- Prior to coating, always prepare paint by polishing to perfection. Remove any polish residue with a thorough wash followed by an IPA wipe down to remove any remaining oily residue.
- Stir the content well prior to use
- Apply a few drops of HPC onto a 22ple Glass Coat Applicator and proceed to apply it onto the paint work in a straight line motion, taking care that the application covers all areas without leaving gaps.
- Allow approximately 3 minutes of dwell time (at 25 degrees C / 77 degrees F) or slightly longer in colder (below 20 degrees C / 68 degrees F) ambient temperature. Wait for the freshly coated surface to hazed up before removing the glass coat softly with the microfiber towel.
- It is highly recommended to cure the surface under infra-red curing lamp.
- If you choose to cure the glass coat under infra-red curing lamp, we recommend the following settings: Set temperature at 65 degrees C / 150 degrees F, cure for between 6 to 8 minutes from a distance of around 2 feet.
- 7. Under ambient curing, allowed approx. 2 hours to settle, then finished off with spray of VS1 Final Coat to complete the application workflow.
- 8. For infra-red curing, you may apply VS1 Final Coat once the surface has cooled down to ambient temperature. Do not apply VS1 Final Coat while the surface is still warm.
- Durability: 3 ~ 4 years
- Recommended: 2 ~ 3 layers, 12 hours apart
Professional Detailer Reviews
Staying true to their reputation, 22ple made sure HPC is extremely easy to work with.
The beading and cleaning characteristics are some of the best I've seen and make drying a car a breeze.
From The Label
Directions
Application Instructions
Apply evenly over entire cool and dry panel. Buff residues lightly once surface began to haze (around 3-5 mins). Apply additional layers after 12hrs as desired.
*Always finish with 22PLE VS1 Final Coat.
Tack time: 8-12hrs
Refer to website for detailed instructions
Apply evenly over entire cool and dry panel. Buff residues lightly once surface began to haze (around 3-5 mins). Apply additional layers after 12hrs as desired.
*Always finish with 22PLE VS1 Final Coat.
Tack time: 8-12hrs
Refer to website for detailed instructions
Customer Reviews
The 22ple family of products are easy to apply, have durability, nice gloss and reflect nicely. I wish all these ceramics coatings would give you the depth of wax when machine applied. 22ple are easy to apply and do not cause high spots if you follow the appropriate timing. I wish the company would come out with more videos and sell more directly to the consumer through stores like Detailed Image. Detail Image is great- just like more competitive pricing.
My experience with 22PLE HPC was both good and bad. the 30mL bottle I purchased said it was good for a large car, but I barely had enough to do my Jeep Grand Cherokee. Lesson learned, always buy more than you will need. The bottle it came in was terrible. Getting the drips out was challenging at best after about 30 minutes of working on the vehicle. Next up came the applicators which are TERRIBLE. Do not buy the 22PLE applicator. They are down right terrible. Unfortunately they were all I had so I had to use them. The surface constantly peeled off if not working on a flat surface. Now to the coating itself...the product went on well when the applicator didn't come apart and came off just as easy after it hazed. The gloss from the coating was instantly noticeable and flat out ridiculous bordering on absurd. Time will tell if I got full coverage and how long it lasts. The price was certainly on the higher end so my hopes are high for the quality to be there. After the coating, I applied the VS1 and it took the gloss to the next level and gave it a deep wet look. The VS1 was very easy to apply, but again I had to use more than what was advertised by the manufacturer to get even coverage. Overall the product is great but requires more homework and preparedness than others I have used. I would definitely recommend it for someone looking for a longer term coating with insane gloss. Make sure you buy better applicators though and maybe a syringe to dispense it.
Hands down my favorite consumer-level coating, and I like it better than some of the pro level coatings I have used. I cannot stress to you how unbelievably easy this coating is to apply, you would nearly have to intentionally try to mess it up. On top of that, it is beautifully glossy and the water behavior is fantastic!
I applied it in ~48° weather and the dwell times were around 5-7 minutes, one section I had let sit for nearly 20 minutes and it was still easy to wipe off (although not recommended to let it sit that long).
I did two coats and did not top with VS1 as I do not have any, although I do have Finitura and some Kamikaze Overcoat I may try.
10/10, this will forever be in my arsenal.
I applied it in ~48° weather and the dwell times were around 5-7 minutes, one section I had let sit for nearly 20 minutes and it was still easy to wipe off (although not recommended to let it sit that long).
I did two coats and did not top with VS1 as I do not have any, although I do have Finitura and some Kamikaze Overcoat I may try.
10/10, this will forever be in my arsenal.
Read all customer reviews of 22ple HPC High Performance Coating
Customers Who Bought This Item Also Bought
Related Categories