22ple Insanity
$134.99
This product qualifies for $4.99 Shipping with coupon DI499
Buy now and pay over time with PayPal Credit. Learn more
Available Sizes
30 ml
$134.99
Product Information
- Insane level of gloss and protection!
- Protects for 3-5 years
- Easy application
- Works great with the 22ple Glass Coat Applicator
- Read full description
Customers Who Bought This Item Also Bought
Product Description
22ple Insanity will apply an unbelievable level of gloss, depth, and protection to your paint with ease! 22ple has been working hard on this high-quality formula and packed it with some of the finest silica base material they could find after scouring the globe. Pair this with the proprietary SleekShell surface finish and you will not only have a coating that lasts a long time but one that will drop your jaw with the amount of gloss it provides. Apply a thin coat with the 22ple Glass Coat Applicator, let the coating cure for 2 - 3 minutes (in most environments), wipe away excess and avoid exposure to outside or extreme temperatures for 8 - 12 hours. Insanity can be applied to paint, coated trim and metal surfaces and will last for 3 - 5 years according to the manufacturer. Featuring a strong chemical bond, an amazing level of UV protection, insane gloss, and a long-lasting layer of protection, 22ple Insanity is a coating you must try!Please Note: 22ple Glass Coat Applicator sold separately.
- Durability - 3~5 years according to manufacturer
- Application - 30~40mins per car (typical)
- Take time - 2~3mins (varies with ambient temperature)
- Curing time - 8~12 hours (varies with ambient temperature)
- Recommended process - Top with Insanity (2 coats)
From The Label
Directions
Apply a thin layer of Insanity evenly over the surface.
Leave it on for 2-3 minutes, then remove with a clean microfiber.
Do not apply excessive pressure.
Always test on a sample panel first before proceeding to the entire car.
Cure time: 8-12 hours (indoor)
Leave it on for 2-3 minutes, then remove with a clean microfiber.
Do not apply excessive pressure.
Always test on a sample panel first before proceeding to the entire car.
Cure time: 8-12 hours (indoor)
Customer Reviews
Not understanding the previous review? Water will either bead or sheet. No other option for it. Insanity is just like all the other 22ple coatings. Applies like butter and removes smoothly; no different application process than any other 22ple coating. Gloss is a high quality finish like the others; didn't do a comparison. Tested this product for a customer before recommending it. Would highly recommend to anyone who is familiar with applying coatings. Time between application and wipe varied between 2-4 minutes, waited till it flashed and gave it 15 seconds further.
Suggestion- no need to put a top coat such as CarPro Reload or Kamikaze Overcoat until some time has passed. Any top coat applied to any coating will then be the primary surface protectant until it wears off. That means any beading or sheeting properties will be the top coat product, not the underlying ceramic coating. Top Coats for coatings should be done when the coating needs rejuvenation several months down the road. Preferably the same manufacturers top coat product due to chemical bonding. However, I use CarPro Reload or Kamikaze Overcoat for all my top coats. They bond well and continue the same protection as the underlying coating.
For DIY'ers: Remember when applying a coating the first wipe will drag product to any surface the towel touches. So when final wiping make sure you watch those other panel pieces for residue and wipe those off. If a bit of coating dries before removing just add new product on top and remove immediately.
Anyone purchasing this product should be highly satisfied with the end result if applied and removed correctly.
Suggestion- no need to put a top coat such as CarPro Reload or Kamikaze Overcoat until some time has passed. Any top coat applied to any coating will then be the primary surface protectant until it wears off. That means any beading or sheeting properties will be the top coat product, not the underlying ceramic coating. Top Coats for coatings should be done when the coating needs rejuvenation several months down the road. Preferably the same manufacturers top coat product due to chemical bonding. However, I use CarPro Reload or Kamikaze Overcoat for all my top coats. They bond well and continue the same protection as the underlying coating.
For DIY'ers: Remember when applying a coating the first wipe will drag product to any surface the towel touches. So when final wiping make sure you watch those other panel pieces for residue and wipe those off. If a bit of coating dries before removing just add new product on top and remove immediately.
Anyone purchasing this product should be highly satisfied with the end result if applied and removed correctly.
Used this on my wife's CTS, silver. Compounded and polished, finishing with Reflect on a gloss pad.Extremely easy application. Put 2 coats on the car 24hrs apart. Really gave the silver paint some gloss. I used Pro V2 a lot but not available anymore. This is better for sure. Wait and see how durability is
Water beading and sheeting doesnt exist.
I followed the instructions ( 2 coats 12 hours apart, left to cure approx 4 minutes before removal with 65f temp and 44% humidity).
Furthered left to cure 48 hours before exposed to outside. I cleaned a small test area on a panel and added overcoat, which beaded like crazy.
So only thing I can tell is either coating that was sold to me was a bad batch, or coating doesn't provide what it is quoted as doing.worst coating I've used by far.
Do yourself a favor and get a different coating that has a much better reputation and customer support.
I followed the instructions ( 2 coats 12 hours apart, left to cure approx 4 minutes before removal with 65f temp and 44% humidity).
Furthered left to cure 48 hours before exposed to outside. I cleaned a small test area on a panel and added overcoat, which beaded like crazy.
So only thing I can tell is either coating that was sold to me was a bad batch, or coating doesn't provide what it is quoted as doing.worst coating I've used by far.
Do yourself a favor and get a different coating that has a much better reputation and customer support.
